OXOID AIR SAMPLER
For use in the pharmaceutical and food production areas or clinical settings for environmental monitoring.
Order Code: EM0100A
Product Components
1 x Oxoid Air Sampler Unit (supplied with head ready-to-use with 90mm plates)
1 x Battery Charger (110V or 220V)
1 x Traceable Calibration Certificate
1 x Documentation Package (1 x Manual, 1 x Quick Guide, 1 x Warranty)
Description
The Oxoid Air Sampler is ready for use with a 90mm plate. The standard sampling head is aluminium. By purchasing a 55mm sampling head, this unit can be easily converted for use with a 55mm contact plate. Also, included in the package is a traceable calibration certificate, manual, warranty, brief instructions and battery charger.
Technical Details
Flow Rate | 100 litres of air per minute |
Impact Speed | <20m/sec |
Battery Life after 4 hour charging depending on treatment/use) | approx. 7 hours |
Validation | Validation work according to BS EN ISO 14698-1:2003 Annex B has shown the Oxoid Air Sampler to have a physical efficiency of 100% for particles, 0.8 to 19.0 micron in size. (Note: validation work carried out by an independent body) |
Quality Check | Oxoid has a Pyramid Quality Check instrument available for routine airflow checking (EM0100P). |
Calibration | Units are despatched with traceable calibration certificates. Official guidelines state that further calibration is required every 6 and 12 months after purchase. Oxoid provide a calibration service (EM0100C). |
Servicing | Oxoid provide servicing for the air sampler |
Other factors:
• Multi-mode option = sequential sampling (allows for representative ‘in operation’ sampling
• Delayed start option = allows operator to leave the room, minimising contamination
• Sample record downloading = CD (EM0110A) and cable (EM0111A) required, allows for compliance with cGMP regulations for data collection and traceability
• Wall/table base plate (EM0109A) available = means that unit remains at sampling site and doesn’t have to occupy work surfaces
Products & Accessories | Order Code |
Oxoid Air Sampler (90mm head ready) | EM0100A |
Aluminium Head for 55mm Contact Plates | EM0155A |
Aluminium Head and adaptor for 90mm Plates | EM0190A |
Stainless Steel Head for 55mm Contact Plates | EM0255A |
Stainless Steel Head and adaptor for 90mm Plates | EM0290A |
Pyramid Quality Check (for customer use) | EM0100P |
Calibration Performance (at Oxoid, inc carriage) | EM0100C |
Battery Charger (220V) | EM0101A |
Battery Charger (110V) | EM0102A |
Soft Carrying Case | EM0104A |
Aluminium Carrying Case | EM0105A |
Floor Tripod | EM0106A |
Table Tripod | EM0107A |
Infra Red Remote Control | EM0108A |
Wall/Table Base Plate | EM0109A |
Oxoid Software | EM0110A |
Oxoid Air Sampler PC Connecting Cable | EM0111A |
General Product Information:
For further information about this product, it components and compatible Oxoid prepared media products, simply download this information sheet (906KB) in PDF format.